Nanjing Chemical Material Corp.
Service
Products

What Is The Active Diluent Of Epoxy Resin? What Is The Active Diluent Of Epoxy Resin?

Table of Content [Hide]

    1. Product Introduction

    The active diluent of epoxy resin is a kind of epoxy compound with small molecular weight containing epoxy group. It has a light color, low viscosity and good compatibility with epoxy resin. The use of this product in epoxy resin formulation can significantly reduce the viscosity of the epoxy resin and improve its processing technology. It can take part in the curing reaction of epoxy resin and become a part of the network structure of epoxy resin cured things. It can promote the flowability of epoxy resin, reduce the shrinkage of cured products and improve the flexibility of cured products.

    Main uses: epoxy resin active diluent, reduce the viscosity of resin, increase the flexibility of cured products, used in impregnation, casting, packaging, lamination, paint and adhesives, etc. Glass fiber and its fabric impregnating agent, can improve the textile properties of glass fiber, as well as the wettability and interfacial bonding strength with resin; Chloride stabilizers have good compatibility with organic chlorides such as PVC and chlorinated paraffin, which effectively inhibit the degradation of chlorides and significantly improve their thermal stability. Fiber finishing agents, used in cotton, linen, wool, silk, and chemical fibers and their fabric finishing, can increase the flexibility, fastness, alkali resistance and dyeing of fibers. Organic synthesis intermediates.

    2. Packaging specifications

    20kg, 25kg plastic barrel or 180, 200kg plastic barrel and iron barrel packaging.

    3. Notices for Storage and Transportation

    (1) Except for allyl and isopropyl glycidyl ether, other non-dangerous goods are stored and transported according to general chemicals.
    (2) Store in a dark, cool, ventilated and dry environment for 12 months.
    (3) After using this product, the remaining product in the package should be tightly covered to prevent moisture absorption.
    (4) This product irritates the skin and eyes. If it touches the skin, it should be washed with soap. If it touches the eyes, it should be washed with plenty of water.
    References
    Related News
    • The Analysis of the Factors Influencing the Odor Production of Polyether Polyol

      The Analysis of the Factors Influencing the Odor Production of Polyether Polyol

      April 21, 2021Polyether polyol is an important macromolecule raw material, which is mainly used to make various polyurethane materials. In recent years, with the continuous improvement of production technology, the...view
    • Egg Yolk Lecithin PC70 vs PC80 vs PC90: A Pharmaceutical Buyer’s Selection Guide

      Egg Yolk Lecithin PC70 vs PC80 vs PC90: A Pharmaceutical Buyer’s Selection Guide

      September 3, 2026Choosing between egg yolk lecithin PC70, PC80 and PC90 should be based on phosphatidylcholine content, the intended formulation, the applicable pharmacopoeia and route-specific quality requirements. A...view
    • Expandable Microspheres Supplier - NCMC

      Expandable Microspheres Supplier - NCMC

      August 18, 2021Expandable microspheres are small, milky white globular plastic particles, 10-45 microns in diameter. When heated to a certain temperature, the volume of foaming agent can be rapidly expanded to dozen...view
    • Styralyl Acetate

      Styralyl Acetate

      October 13, 2021Styralyl acetate is a colorless to yellowish liquid chemical. The esterification method is mainly used in the production of Styralyl acetate with acetic acid and methyl phenyl methanol as raw material...view
    • Preparation of Ethyl Iodide

      Preparation of Ethyl Iodide

      April 29, 2019Ethyl iodide is usually reacted with ethanol, iodine and red phosphorus, but the reaction is slow, and it needs to be heated in a reflux device for several hours.view
    • Main Applications of Bronopol

      Main Applications of Bronopol

      October 30, 2020At ordinary temperature, bronopol is a kind of white to light yellow and yellowish brown crystalline powder. It is odorless, tasteless, soluble in water, ethanol and propylene glycol but difficult to ...view
    • TEL:+86-25-52337978
    • EMAIL: info@njchm.com
    • ADDRESS:12/F, Block B, Technology and Innovation Building, Nanjing University of Technology, No.5 New Model Road, Nanjing 210009, China